- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
International Products
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Interplus 356
International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.A high performance maintenance coating for use on a wide variety of...
International Intercure 200
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Interchar 2060
International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified....
International Intercure 384
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977As a high build intermediate to provide...
International Interprime 306
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
International Interstores Alkyd Primer
International Interstores Alkyd Primer, a quick drying one pack primer that is surface tolerant and compatible with most substrates and able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only. Part of a dedicated range of On Board Maintenance (OBM) products specifically...
International Interprime 539
International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intercure 324
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977
International Interchar 1190
International Interchar 1190 is a thin film water-borne intumescent coating optimized for 90 and 120 minutes fire resistance, as part of the Interchar range for cellulosic fire protection, International Interchar 1190 will maintain your architectural aesthetics for fire resistance periods up to 120 minutes on structural steelwork.Best in...
International Intergard 251HS
International Intergard 251HS is a two component, low VOC, high solids, fast curing epoxy primer and intermediate containing zinc phosphate anti-corrosive pigmentation.Please note that all colours have a 10 -14 day lead time, on top of the stated delivery Suitable for overcoating within 2 hours Contains zinc phosphate anti-corrosive...
International Interzinc 72
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
International Intergard 400
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Interzinc 52 (Winter Grade)
International Interzinc 52 (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures.Two component Metallic zinc rich epoxy primer Complies with the composition and performance requirements of SSPC Paint 20
International Interchar 2060c
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...
International Interchar 1260
International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Class leading thin film waterborne intumescent coating Zero VOC* formulation reduces environmental impact...
International Interplate 937
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing.
International Intercure 420
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...
International Intergard 276
International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
International Interchar 1120
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site...
International Intergard 263
International Intergard 263, a two pack, tar free, epoxy tie coat for use between anticorrosives and either antifoulings or cosmetic finishes, ensuring maximum system adhesion and performance on outside shell vessel areas.Use as a sealer coat over Tributyltin (TBT) antifoulings For use at newbuilding, maintenance & repair or on board...
International Interchar 2090
International Interchar 2090 is a single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to maintain your architectural aesthetics whilst providing fire protection for up to 120 minutes for columns, I-sections, cellular beams and hollows.Solvent borne intumescent coating with excellent durability...
International Intergard 405
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats Can also be used...
International Interplate 398
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
International Interzinc 42
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries.
International Intersleek 717
International Intersleek 717, is a two pack foul release system linkcoat.Enables application of the Intersleek 700 and Intersleek 900 foul release systems over SPC antifoulings For use at maintenance & repair Hard dry in as little as 3 hours (at 25°C) Dries down to 0°C in 24 hours Good application rate of 5.4 m²/litre at 100...
International Intertuf 262
International Intertuf 262 is a surface tolerant, two pack epoxy primer.As an epoxy anticorrosive coating for use from keel to rail Suitable for use with controlled cathodic protection For use at newbuilding, maintenance & repair or on board maintenance Certified for:Food Contact - Carriage of Grain (NOHH) Fire Resistance -...
International Intergard 162
International Intergard 162 is a two pack, tar free, epoxy tie coat.For use at newbuilding or maintenance and repair Used as a primer for internal steel work Fire Resistance - Surface Spread of Flame (Exova Warringtonfire) Fire Resistance - Smoke and Toxicity (Exova Warringtonfire) Fire Resistance - Marine Equipment Directive...
Need Help?
Need Help?
International Paints are leading manufacturers of industry scale intumescent paints. Their customers within the industrial sector include some of the biggest transportation and electrical brands in the world, like Ford, Boeing and Samsung, as well as international homeware brands including IKEA. Use the sidebar (or mobile) filter to by product type, 4,800+ colour options (grouped into Colour Families), base type, application method and more.
About International Paints
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Clients
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
Products
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.