- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
International Products
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzone 954
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.A high film build, high solids, abrasion...
International Interlac 665
International Interlac 665 is a single component alkyd gloss enamel finish.Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants Suitable for areas of limited chemical exposure where an economical single pack finish coat is required Cosmetic finish coat for alkyd...
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat.Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 1735
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
International Interfine 629HS
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Interfine 878
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.A step change in long term colour and gloss compared to...
International Interzone 954 (Rapid Cure)
International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...
International Interplus 356
International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.A high performance maintenance coating for use on a wide variety of...
International Interfine 691
International Interfine 691 is a two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability. International Interfine 691 offers equivalent performance to typical recoatable polyurethane cosmetic finishes.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide...
International Intercure 200
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Interchar 2060
International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified....
International Intercure 384
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977As a high build intermediate to provide...
International Interprime 306
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
International Interstores Alkyd Primer
International Interstores Alkyd Primer, a quick drying one pack primer that is surface tolerant and compatible with most substrates and able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only. Part of a dedicated range of On Board Maintenance (OBM) products specifically...
International Interprime 539
International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
International Interlac 678
International Interlac 678, a one pack alkyd varnish.High gloss Good durability For interior and exterior woodwork For use at newbuilding, maintenance and repair or on-board maintenance
International Interfine 979
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.Excellent long term color and gloss retention Contains no free isocyanate Low...
International Intercure 324
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977
International Intergard 251HS
International Intergard 251HS is a two component, low VOC, high solids, fast curing epoxy primer and intermediate containing zinc phosphate anti-corrosive pigmentation.Please note that all colours have a 10 -14 day lead time, on top of the stated delivery Suitable for overcoating within 2 hours Contains zinc phosphate anti-corrosive...
International Interzinc 72
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
International Intergard 400
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Intertherm 875
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
International Interplate 937
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing.
International Intercure 420
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...
International Intergard 276
International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
International Interchar 1120
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site...
International Intergard 263
International Intergard 263, a two pack, tar free, epoxy tie coat for use between anticorrosives and either antifoulings or cosmetic finishes, ensuring maximum system adhesion and performance on outside shell vessel areas.Use as a sealer coat over Tributyltin (TBT) antifoulings For use at newbuilding, maintenance & repair or on board...
International Inter H2O 699
International Inter H2O 699 a two-component waterborne acrylic polyurethane finish.Provides excellent durability Long term recoatability Compatible with a wide range of International systems
International Intergard 405
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats Can also be used...
Need Help?
Need Help?
International Paints are leading manufacturers of industry scale intumescent paints. Their customers within the industrial sector include some of the biggest transportation and electrical brands in the world, like Ford, Boeing and Samsung, as well as international homeware brands including IKEA. Use the sidebar (or mobile) filter to by product type, 4,800+ colour options (grouped into Colour Families), base type, application method and more.
About International Paints
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Clients
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
Products
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.