Follow us on:

  • Temporarily Out-of-Stock
Graffiti Magic  Multi Surface Graffiti Remover

Graffiti Magic Multi Surface Graffiti Remover

We no longer stock this product, but can recommend AG3 Graffiti Remover as a great alternative.

Quantity
Product not available
Temporarily Out of Stock

questions 6 questions about the product
Product Details

Questions

Question about the product

* Required fields
(read)
questions dave h on 2018-01-29 17:08:56
Question: 

How to get marker pen graffiti off upvc

Answer from Rawlins’ Technical Team:

Some Plastics are not compatible with even the gentlest of cleaners, so it is essential to carry out a ‘small discrete trial application’ prior to any use on these materials to see if removal can be carried out successfully & without any long term damage to, or change in, surface appearance.

It is entirely the responsibility of the user to determine both the initial suitability and then the appropriate dwell times for Graffiti Magic Multi Surface Graffiti Remover for their particular use.

On Plastics or Coated Surfaces

Test for ‘dwell’ time (the amount of time the remover takes to work). Apply the product to a small area of graffiti. Using a clean cloth check a part of this area every few minutes. When the graffiti is loose and lifting clean off the surface this is your ‘dwell time’. Wipe off completely and rinse well with clean water. Check to ensure no surface damage has occurred. If sucessful, apply Graffiti Magic Multi Surface Graffiti Remover liberally over the area to be cleaned using a brush and allow to dwell for the pre-determined time before removal. For small areas remove with a clean cloth turning the cloth repeatedly to ‘lift’ the Graffiti away then rinse thoroughly. For larger areas wash down with clean water using an appropriate brush or sponge.

Refer to the product data sheets TDS (Technical Data Sheet) and MSDS (Material Safety Data Sheet) available to download above for more information.

questions Jim Mcfarlane on 2018-01-18 08:47:34
Question: 
Do you have any product that will remove paint from a recently render surface.
Answer from Rawlins’ Technical Team:

To remove graffiti from un-coated, porous surfaces we recommend Graffiti Magic Bare Surface Graffiti Remover.

questions Campbell syme on 2017-02-07 06:08:26
Question: 
Looking for a graffiti remover that works on sandstone
Answer from Rawlins’ Technical Team:

Graffiti Magic Bare Surface Graffiti Remover will remove graffiti from sandstone.

questions nigel kay on 2017-01-11 16:21:45
Question: 
what coverage of area can you expect for a 20 litre bottle?
Answer from Rawlins’ Technical Team:

A 20lt should remove graffiti from approximately 30-40m² of surface area dependant upon the surface texture, porosity and level of graffiti attack.

questions clare evans on 2016-10-10 15:35:29
Question: 
can you provide some guidance on roughly what area a 5l bottle of graffiti magic will cover. thanks
Answer from Rawlins’ Technical Team:

5 litres of Graffiti Magic Multi Surface Graffiti Remover will clean approximately 10m².

questions Martin on 2015-08-11 14:21:43
Question: 

Looking for a good graffiti remover that will remove marker pen from sandstone, tried various aerosols that have been no good.

Answer from Rawlins’ Technical Team:

For stubborn graffiti on bare surfaces we recommend our 1402 Pro Coating Remover. We've had great success with the product on similar projects and it evens removes any shadowing that can sometimes be left on particularly porous surfaces.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Graffiti Magic Multi Surface Graffiti Remover is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT