- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity.
International Intergard 214 has the following specification approvals:
- UK Department of Transport Item No.159
International Intergard 214 can be overcoated with a wide range of products, including:
- Intercure 200
- Intercure 200HS
- Intercure 324
- Intercure 384
- Intergard 475HS
- Interseal 670HS
- Interzone 505
International Intergard 214 is designed to seal porosity in aluminium metal spray. When applying by brush, work the sealer thoroughly into the surface of the aluminium metal spray.
When application is by spray rather than by brush, careful inspection will be needed to ensure thorough sealing of the aluminium metal spray. Any runs, sags or pooling on horizontal surfaces should be brushed out immediately.
Best results will be achieved at temperatures above 0°C (32°F). Surface temperature must always be a minimum of 3°C (5°F) above dew point. In common with all epoxies, Intergard 214 will chalk when exposed to weathering but this will not reduce efficiency in sealing metal spray.
Level of sheen and surface finish are dependent on application method. Avoid using a mixture of application methods whenever possible. Intergard 214 is not suitable for exposure to acid or alkaline environments.
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Metal, Sprayed Aluminium Coatings
- Application Method
- Airless Spray, Spray, Brush, Roller
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Coverage
- 12m² per litre
- Recommended Thinner/Cleaner
- International GTA220
- Solids by Volume
- 30%
- VOC
- 619 g/kg
- Touch Dry
- 5°C: 45 minutes , 15°C: 30 minutes, 25°C: 20 minutes, 40°C: 15 minutes
- Touch Dry
- 20 mins
- Recommended Dry Film Thickness
- 15-25 microns
- Recommended Wet Film Thickness
- 50-83 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Pot Life
- 5°C: 16 hours, 15°C: 10 hours, 25°C: 5 hours, 40°C: 3 hours
- Hard Dry
- 5°C: 5 hours , 15°C: 3 hours, 25°C: 2 hours, 40°C: 1 hour
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Metal
- Suitable For Use On
- Thermally Sprayed Aluminium Coatings
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Intermediate
- Product Usage Type
- Sealer Coat
- Product Usage Type
- Intermediate
- Product Range
- Intergard
- Colour Family
- Aluminium
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intergard 214 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT