Follow us on:

Sherwin-Williams Firetex FX5090

Sherwin-Williams Firetex FX5090

FX5090
SHE2154

Water based TCEP free thin film intumescent coating, designed for application by airless spray to provide fire resistance for periods of up to 120 minutes on structural steel

Colour
Size
Finish
£322.00(incl. VAT)
£268.33(ex. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

questions 2 questions about the product
Description

Please note that this product should not be used without first receiving an application schedule from our Technical Department. Please download and complete the 'FIRETEX Intumescent Support Request Form' and return by email to [email protected]

If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).

Endorsements

  • Certifire Approved – Certificate CF5188
  • This product has been assessed in accordance with the Criteria of Acceptability given in the ASFP/BCF “Industry Guidance document”.
  • This product has been tested and assessed in accordance with the ASFP fire testing protocol for cellular beam protection. See Section 4.1 from ASFP “Yellow Book” 5th Edition.
  • Tested and assessed to EN13381-8.
  • European Technical Assessment ETA-15-0486. CE Mark Number: 1121-CPR-GA5024. 

Recommended Primers

A range of primers have been fire tested and approved for use under FIRETEX FX5090. Please consult Rawlins Paints for detailed information. Must not be applied directly to galvanized steel and zinc rich primers. 

Recommended Topcoats

If it can be guaranteed that application and subsequent in-service conditions will be in a C1 environment as defined in ISO 12944-2:1998, then no topcoat is required.

For any other situation a topcoat must be applied, consult our Technical Team for advice.

The above products should be used for subsequent re-decoration. 

Additional Notes

In common with other water based coatings, the drying of this material is retarded by high humidity conditions. Lack of air movement also slows down the drying process, and under such conditions it is advisable to introduce some method of circulating air over the coated surface in order to speed up the drying. A ventilated air speed of 2 metres per second is recommended.

Numerical values quoted for physical data may vary slightly from batch to batch. 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
2154-276860

Data sheet

For Use By
Industrial Use
Interior / Exterior Use
Interior Use
Single, Two or Three Pack
Single
Application
Brush, Spray
Touch Dry
1.5 hours
Base Type
Water-Based
Suitable For Use On
Structural Steel
Finish
Matt
Application Method
Brush
Application Method
Spray
Product Usage Type
Basecoat
Product Range
Firetex
Colour Family
White
Fire Rating
30 Minutes
Fire Rating
60 Minutes
Fire Rating
90 Minutes
Site Application
On-Site
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions david cooke on 2024-01-15 11:37:48
Question: 

Can any of your intumescent paint systems be used to provide 60 minutes fire resistance to 232/18 galvanized cold rolled steel roof purlins?

Answer from Rawlins’ Technical Team:

Unfortunately no, we do not have an intumescent paint suitable for application to cold rolled steel.

questions Terry on 2022-09-07 13:22:15
Question: 

Hi Just wondering how much m2 would the 20litres cover? Would need to cover 478 steel plates at 400x400mm per plate. Have done a calculation of roughly 7.5m2 per 20liters , would this be correct? Can't seem to find the m2 coverage in information sheets. You're help is greatly appreciated. Regards, Terry

Answer from Rawlins’ Technical Team:

Thank you for the enquiry, unfortunately this product does not have fixed coverage rates and a specification will be required.

Please send the information below to [email protected]

- Level of fire protection required (i.e. 30, 60, 90min, etc.)
- Each steel section dimension (i.e. 254x146x37 UB)
- Quantity and length of each section (or overall meterage for each section)
- Orientation (horizontal or vertical)
- Number of sides to be painted (all sides, 3 sides, 1 flange, etc.)
- Structural Steel Design Code (i.e. EuroCode, BS5950, BS476; Part 21, etc.)
- Building type (i.e. office, domestic, storage, etc.)
- Environment (internal, external, car park, chemical exposure, etc.)
- Application on site or in shop
Alternatively you can just forward us drawings, fabrication/cutting lists and we'll extract the information from them but in that instance we'd need some guidance as to what to allow for i.e. all steels on first floor, etc.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sherwin-Williams Firetex FX5090 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery