- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 4,000+ coloured fire retardant paint system for interior and exterior timber surfaces.
- Each pack contains the correct amount of basecoat (Thermoguard Timbercoat Insulating Basecoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved in line with the manufacturers recommendations to the area in question.
Important!
- For use on timber with a minimum thickness of 7mm.
- Please note should you be unsure whether this product/system is suitable for your requirements please see below.
Product customisation
Don't forget to save your customization to be able to add to cartPlease note should you be unsure whether this product/system is suitable for your requirements please download and complete the 'Thermoguard Wood Enquiry Form' and return by email to [email protected]
Upon receipt our team will respond within 24-48 hours with specification/advice on our best suggestion for your project. If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).
Thermoguard Timbercoat BS Class 1/0 & EN Class B System - 4,000+ colours available from RAL, BS & NCS.
Thermoguard Timbercoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior and exterior timber surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.
Each component of the packs can still be purchased individually if required here: Thermoguard Timbercoat Insulating Basecoat and here: Thermoguard Smoke & Flame Retardant Dualcoat
Pack Contents
- 20m² Pack (Interior Spec.) = 1 x 20m² Timbercoat Insulating Basecoat + 1 x 20m² Smoke & Flame Retardant Dualcoat
- 20m² Pack (Exterior Spec.) = 1 x 20m² Timbercoat Insulating Basecoat + 1 x 40m² Smoke & Flame Retardant Dualcoat
- 40m² Pack (Interior Spec.) = 1 x 40m² Timbercoat Insulating Basecoat + 1 x 40m² Smoke & Flame Retardant Dualcoat
- 40m² Pack (Exterior Spec.) = 1 x 40m² Timbercoat Insulating Basecoat + 1 x 80m² Smoke & Flame Retardant Dualcoat
- 80m² Pack (Interior Spec.) = 1 x 80m² Timbercoat Insulating Basecoat + 1 x 80m² Smoke & Flame Retardant Dualcoat
- 80m² Pack (Exterior Spec.) = 1 x 80m² Timbercoat Insulating Basecoat + 2 x 80m² Smoke & Flame Retardant Dualcoat
Specification & Application
Prepare & apply according to manufacturer’s instructions
- 1 coat of Thermoguard Timbercoat Insulating Basecoat
- 1 coat* of Thermoguard Smoke & Flame Retardant Dualcoat
*Apply 2 coats of Thermoguard Smoke & Flame Retardant Dualcoat for external, damp or high wear areas - Purchase 'Exterior Spec.' packs for this use. 2 coats may also be required for strong/dark colours - Thermoguard Timbercoat will be provided in a suitable undercoat shade to aid topcoat opacity unless instructed otherwise.
Please note: Timber must be clean and thoroughly dry prior to application (maximum 18% moisture content). Any gaps should be sealed with Thermoguard Intumescent Mastic. Fire should be prevented from accessing unprotected wood surfaces and for external applications it is recommended wood has been sealed on the reverse face to stop water ingress.
NOT suitable for the topside of floor surfaces that will be trafficked/walked on.
For 30 & 60 minute protection please see Thermoguard Timbercoat 30 & 60 Minute Protection System Packs.
For fire protection to doors, see Door Upgrade Products
Application to OSB/Sterling Board
This is a board made of chips of wood glued together to form a hard non-decorative board. If it needs fire coating, Thermoguard Fire Varnish or Timbercoat System can be applied to it. However we first recommend a test is carried out by applying a small amount of the proposed coating to the board to check for "cessing" / "cissing" (where coating gathers together in lumps and may leaving bare patches between). If this occurs the board should be degreased/cleaned and allowed to dry before testing again - if this still does not provide a satisfactory application please contact our Technical Team for further advice on 0113 2455450 (option 2) or send a message to [email protected].
UKAS Fire Test Standards
- EN Class B s1 d0
- BS Class 1 and Class 0
Project Fire Certification
We issue a Certificate of Supply on request for projects for insurance, Fire and Building Control Authority and Client Records.
Preparation
- Surfaces should be free of contamination, sound, clean and dry.
- Thoroughly abrade knotting, gloss, hard or smooth paints. Check adhesion of any existing coatings.
- Unknown coatings or old fire coatings – contact our Technical Department on 0113 2455450.
Application Conditions
- Apply to dry wood in dry conditions.
- Max. timber moisture content 18%.
- Max. relative humidity 70%.
- Min. temp 5°C and 2°C above dewpoint.
- Protect from rain until 1st coat of Thermoguard Smoke & Flame Retardant Dualcoat is dry.
- Touch Dry: 4 hours / Overcoat: 6 hours
- Ensure fully hard dry before next coat, only apply to dry timber in good drying conditions.
- For use on timber with a minimum thickness of 7mm.
Spray equipment suggestions for Thermoguard Timbercoat and Thermoguard Smoke & Flame Retardant Dualcoat;
- Pressure Pot & Gun conventional unit with small compressor
- Ensure all traces of solvent flushed out
- Thin 5 > 10% with water to spray viscosity
- Adjust fluid flow & air flow as normal for acrylic emulsion paint
OR
- Airless Graco 1500, 3500 or equivalent
- 3/8” line, 30 mesh filter on machine, not filter in gun
- 521 or 523, broad areas 621 or 623 tip
Ensure coverage is applied as per can - i.e. 20m² can covers 20m², 80m² can covers 80m², etc.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Thermoguard
- Interior / Exterior Use
- Interior & Exterior
- Application Method
- brush, roller, spray
- Single, Two or Three Pack
- Two-Pack
- Touch Dry
- 4 hours
- Dry to Recoat
- 6 hours
- Suitable For Use On
- Wood
- Finish
- Eggshell
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Basecoat & Topcoat
- Product Range
- Timbercoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Lilac
- Colour Family
- Salmon
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
Questions
Question about the product
George Parton on 2022-09-15 12:48:25 | Question:
Will this paint make timber A1/A2 rated against BS EN 13501 Part 1? Can you provide certification for this? |
Answer from Rawlins’ Technical Team:
No, unfortunately we do not have a paint we can recommend to achieve A1 or A2 ratings. The maximum level of fire protection we can supply for application to timber is 60mins. | |
sarah Arnold on 2022-05-17 13:01:19 | Question:
Can this produce go on a matt laminate ? |
Answer from Rawlins’ Technical Team:
Unfortunately no, this cannot be used on a laminate. | |
Adey on 2021-03-22 18:34:39 | Question:
Does this product come in clear? |
Answer from Rawlins’ Technical Team:
No, but Thermoguard Fire Varnish BS Class 1/0 & EN Class B System is available in clear or translucent stained finishes and will achieve the same level of fire protection on suitable substrates. | |
Rakesh on 2017-06-05 16:52:40 | Question:
Can you use the fire protective paint on treated timber. |
Answer from Rawlins’ Technical Team:
Any pre-treatment should be free from wax or silicones. If caustic / high pH treatments used, neutralise wood pH before applying coatings. Ensure damp & fluid from wood treatment saturation fully dry out. Remove any loose surface deposits. If treatment left wood coated, contact our Technical Department with product information for further advice. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Thermoguard Timbercoat BS Class 1/0 & EN Class B System is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Thermoguard Smoke & Flame Retardant Dualcoat
4,000+ matt and eggshell colours for use over Thermoguard Timbercoat or Thermoguard Timbercoat Insulating Basecoat. Topcoat and maintenance paint for timber surfaces protected with Thermoguard Timbercoat. Emits a safe fire-damping vapour in a fire to control flame spread and suppress smoke. As part of a complete system achieves 30 or 60...
Thermoguard Timbercoat 60 Minute System
An intumescent paint system in 4,000+ colours for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Thermoguard Smoke & Flame Retardant (SFR) Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question....
Thermoguard Timbercoat Door Upgrade System
An intumescent paint system to upgrade solid doors to 30min Fire Resistance, with 4,000+ colour options. Available as a convenient pack containing the required basecoat and topcoat to protect 2 doors in a white or coloured Eggshell or Gloss finish Thermoguard UK will issue a Fire Certificate for Authority approved projects following...
Thermoguard Timbercoat Insulating Basecoat
4,000+ colours, durable fire protection paint for interior and exterior timber surfaces: Meets new Fire Regulations standard: BS EN Class B s1 d0, BS Class 1. Class O Surface Spread of Flame. Can also achieve 30 & 60 minutes Fire Resistance in certain instances. Expands to create a barrier, insulating wood from heat and oxygen....