May we use this paint on a slab of UFH? And to what temp.! We can limit the temperature if needed..

Assuming the substrate is clean, dry, sound and prepared as detailed in the technical datasheet, although the heating doesn't need to be turned off on application, providing the temperature doesn't exceed 60C, this product should be fine for application. It will assist with drying times too if on/around the 60C mark. We'd recommend applying to a small test area firstly to check for compatibility and adhesion prior to full application.

Is this product suitable for painting over external terracotta floor tiles which are laid in an open porch adjacent to my front door? If so will an undercoat or floor sealer be required as part of the preparation or finishing works? If used how long before flower pots can be placed on the newly painted surface?

No this product is not suitable. Assuming the external terracotta tiles are clean, dry, sound and prepared as detailed in the technical data sheet you could consider Smartkote Clear Primer Treatment followed by 2 coats of Smartkote Protectakote UVR Smooth . This is available in a range of colours in a gloss finish. This will be fully cured in approximately 4-7 days.

Hi, I have threes questions 1. What products would be best for routine cleaning? 2. Also, I have followed the instructions (acid etch, floor sealer, etc) even applying three coats, but the finish I have is matt there is no sheen at all. Can you suggest why it has come out as matt? 3. My puppy peed on the floor and now there is a yellow mark that looks like it has stained the floor. Im hoping that any coffee/ tea spills won't stain also. Can you recommend a sealer to go over the paint?

Thank you for the enquiry, general domestic cleaning products should not effect the coating if used, we have contacted you directly for more information to assist further.

Hello, is this paint ok to use on a resin floor?

Assuming the resin applied to the floor is a single pack, it is clean, dry, sound and prepared as detailed in the Technical Data Sheet then yes it would be suitable. If the resin applied to floor is a two pack then we would recommend Rust-Oleum 9200 Rust-O-Thane .

Product states suitable for outdoor use, how durable on concrete slab fully exposed to all elements and foot traffic only?

The product would be suited to the environment and traffic you have described however the manufacturer doesn't state any life expectancy for the product. If you have a specific requirement regarding lifespan or durability we may have other options so please contact our Technical Team on 0113 2455450 (option 2) to discuss.

Can this paint be applied to a kitchen floor which has been levelled with a latex self-levelling compound?

You will need to confirm with the latex self-levelling compound manufacturer if the product is paintable or not. If they confirm it is overpaintable with a water based coating, then yes this product would be suitable.

Hello, is it possible to get a colour chart or sample pots of your acrylic floor paint?

Unfortunately no colour charts are available, the colours available are from industry standard colour ranges that are not unique to any one manufacturer. Also sample pots are not available due to these being from a professional line of products.

We want to use this paint on newly laid asphalt in our kitchen. The asphalt will be 16mm thick. How long do we have to wait for asphalt to dry? Do we need to use primer?

This is the first time we have heard of asphalt being used in this situation. A sphalt is generally used outside and any tar residues which exude from the fresh coating will wash away in the rain over time. This isn’t going to happen in an internal kitchen environment. We would suggest you contact the installer of the asphalt and get their advice, i.e can the asphalt be coated, how long you should leave it, what preparation is required, etc.

I have floor boards that are probably pine and painted or stained black. I don’t know what they have been treated with. Will I be able to lightly sand and then use your acrylic paint. Also how to I request a specific RAL colour? Thank you

Yes this should be fine, however just ensure it isn't something like an oil or wax product that has been used on the floors as this would affect adhesion. You can click 'Select a different colour' on the product page to choose any RAL or BS colour in this product.

Is Blackfriar floor paint tough & durable enough to have in bedroom & withstand moving furniture around like bed etc on it .

Blackfriar Professional Acrylic Floor Paint is suitable for domestic use and could be used in this situation. Provided the floor is wood or concrete and the preparation is followed carefully the acrylic floor paint can be applied. Bare surfaces require a sealer followed by 2 coats of the floor paint as recommended. The coating should be allowed to fully harden before moving furniture about. Allow 7 days for the coating to cure hard. Any sharp objects moved across the floor may damage the coating, felt pads can be used under chair legs, bed frame lags etc and will minimise any damage.

Blackfriar Professional Acrylic Floor Paint

Reference BF2010002

Brand Blackfriar Professional

Search ID BLA501

Protects and transforms floors inside and out, with an attractive, tough, durable, easy-to-clean thermoplastic coating which prevents the dusting of concrete surfaces. Suitable for asphalt and Tarmac. Quick drying and low odour.

Indoor and outdoor use - Water Based - low odour
Suitable for asphalt, Tarmac, brickwork, concrete, cement, wood, metal and stone
Resistant to grease, oil and weak solutions of acid and alkali
Can be applied to previously painted surfaces - Brush or roller application
Ideal for domestic, commercial and light industrial use
Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
5L Ready Mixed Black is only available on 7-10 Working Day Delivery option

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Buy A Paint Colour Sample

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£68.53(incl. VAT)

£57.11(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

12 questions about the product

Description

Blackfriar Professional Acrylic Floor Paint is a quick drying, low odour water based floor paint providing a tough and durable finish on virtually any surface. Blackfriar Professional Acrylic Floor Paint protects and transforms floors with an attractive finish for surfaces such as brickwork, concrete, cement, wood, metal and stone.

Blackfriar Professional Acrylic Floor Paint is also ideal for asphalt and tarmac, it protects floors with an easy-to-clean thermoplastic coating and stops the dusting of concrete surfaces. Blackfriar Professional Acrylic Floor Paint resists grease, oil and weak solutions of acid and alkali, making it ideal for domestic, commercial and industrial use.

Features & Benefits

Indoor and outdoor use.
Water Based - low odour.
Quick drying.
Suitable for asphalt, Tarmac, brickwork, concrete, cement, wood, metal and stone.
Resistant to grease, oil and weak solutions of acid and alkali.
Can be applied to previously painted surfaces.
Brush or roller application.
Ideal for domestic, commercial and light industrial use.

Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Acrylic Floor Paint.

Application

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Acrylic Floor Paint. On previously painted surfaces apply 1-2 coats as required.

Blackfriar Professional Acrylic Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in cold (below 10°C), damp or humid conditions.

If concrete floors have no profile then pre-treat with Blackfriar Professional Acid Etch to provide a mechanical key, followed after thorough rinsing by Blackfriar Professional Water Based Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Acrylic Floor Paint.

Coverage Rate

10-12m² /litre per coat. Two coats recommended.

Drying Time

4-6hrs @20°C. Allow to dry for a minimum of 6hrs @20°C between coats. Full cure is achieved in 3-5 days @20°C.

Clean Up

Remove as much product from application equipment as possible before washing with water. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details

Reference 501-956314

Data sheet

Manufacturer: Blackfriar Professional
For Use By: Consumer Use
Interior / Exterior Use: Interior & Exterior
Water / Solvent Based: Water
For Use On: Asphalt, Tarmac, Brickwork, Concrete, Cement, Wood, Metal, Stone
Application Method: Brush, Roller
Sheen: Semi-Gloss
Colour: Standard / Ready Mixed
VOC Levels: Low (50-149 g/l)
Single, Two or Three Pack: Single
Pack Size: 1L, 2.5L, 5L
Parts: One
Base Type: Water Based
Interior/Exterior Use: Both
Suitable Substrates: Asphalt, Tarmac®, Brickwork, Concrete, Cement, Wood, Metal, Stone.
Application: Brush, Roller
Dry to Recoat (at 20°C): 6hrs
Coverage: 10-12m² per litre
Recommended Thinner/Cleaner: Water
Min. Application Temperature: 10°C
VOC: 140g/litre
Touch Dry: 4-6 Hours
Finish: Semi Gloss
UN Number: N/A
Base Type: Water-Based
Suitable For Use On: Metal
Suitable For Use On: Concrete
Suitable For Use On: Brick
Suitable For Use On: Stone
Suitable For Use On: Wood
Suitable For Use On: Walls
Suitable For Use On: Asphalt
Suitable For Use On: Cement
Finish: Semi-Gloss
Application Method: Brush
Application Method: Roller
Components: 1K
Product Usage Type: Topcoat
Fastest Delivery: Next Working Day
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: White
Product Type: Acrylic

Attachments

Download

Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Simon on 2024-10-10 15:30:31	Question: May we use this paint on a slab of UFH? And to what temp.! We can limit the temperature if needed..
	Answer from Rawlins’ Technical Team: Assuming the substrate is clean, dry, sound and prepared as detailed in the technical datasheet, although the heating doesn't need to be turned off on application, providing the temperature doesn't exceed 60C, this product should be fine for application. It will assist with drying times too if on/around the 60C mark. We'd recommend applying to a small test area firstly to check for compatibility and adhesion prior to full application.

Alan on 2023-08-11 11:27:32	Question: Is this product suitable for painting over external terracotta floor tiles which are laid in an open porch adjacent to my front door? If so will an undercoat or floor sealer be required as part of the preparation or finishing works? If used how long before flower pots can be placed on the newly painted surface?
	Answer from Rawlins’ Technical Team: No this product is not suitable. Assuming the external terracotta tiles are clean, dry, sound and prepared as detailed in the technical data sheet you could consider Smartkote Clear Primer Treatment followed by 2 coats of Smartkote Protectakote UVR Smooth. This is available in a range of colours in a gloss finish. This will be fully cured in approximately 4-7 days.

James on 2021-12-03 22:09:39	Question: Hi, I have threes questions 1. What products would be best for routine cleaning? 2. Also, I have followed the instructions (acid etch, floor sealer, etc) even applying three coats, but the finish I have is matt there is no sheen at all. Can you suggest why it has come out as matt? 3. My puppy peed on the floor and now there is a yellow mark that looks like it has stained the floor. Im hoping that any coffee/ tea spills won't stain also. Can you recommend a sealer to go over the paint?
	Answer from Rawlins’ Technical Team: Thank you for the enquiry, general domestic cleaning products should not effect the coating if used, we have contacted you directly for more information to assist further.

Robert Evans on 2020-11-06 11:37:21	Question: Hello, is this paint ok to use on a resin floor?
	Answer from Rawlins’ Technical Team: Assuming the resin applied to the floor is a single pack, it is clean, dry, sound and prepared as detailed in the Technical Data Sheet then yes it would be suitable. If the resin applied to floor is a two pack then we would recommend Rust-Oleum 9200 Rust-O-Thane.

John on 2020-03-25 11:51:03	Question: Product states suitable for outdoor use, how durable on concrete slab fully exposed to all elements and foot traffic only?
	Answer from Rawlins’ Technical Team: The product would be suited to the environment and traffic you have described however the manufacturer doesn't state any life expectancy for the product. If you have a specific requirement regarding lifespan or durability we may have other options so please contact our Technical Team on 0113 2455450 (option 2) to discuss.

Andrew Bryant on 2020-02-29 12:36:02	Question: Can this paint be applied to a kitchen floor which has been levelled with a latex self-levelling compound?
	Answer from Rawlins’ Technical Team: You will need to confirm with the latex self-levelling compound manufacturer if the product is paintable or not. If they confirm it is overpaintable with a water based coating, then yes this product would be suitable.

Simon Price on 2020-02-23 12:43:37	Question: Hello, is it possible to get a colour chart or sample pots of your acrylic floor paint?
	Answer from Rawlins’ Technical Team: Unfortunately no colour charts are available, the colours available are from industry standard colour ranges that are not unique to any one manufacturer. Also sample pots are not available due to these being from a professional line of products.

Jennifer Byrom on 2019-02-27 21:45:40	Question: We want to use this paint on newly laid asphalt in our kitchen. The asphalt will be 16mm thick. How long do we have to wait for asphalt to dry? Do we need to use primer?
	Answer from Rawlins’ Technical Team: This is the first time we have heard of asphalt being used in this situation. Asphalt is generally used outside and any tar residues which exude from the fresh coating will wash away in the rain over time. This isn’t going to happen in an internal kitchen environment. We would suggest you contact the installer of the asphalt and get their advice, i.e can the asphalt be coated, how long you should leave it, what preparation is required, etc.

Sue on 2019-02-23 12:54:01	Question: Can it be used on a wet room floor?
	Answer from Rawlins’ Technical Team: No.

Teresa Barnes on 2018-12-05 19:18:07	Question: I have floor boards that are probably pine and painted or stained black. I don’t know what they have been treated with. Will I be able to lightly sand and then use your acrylic paint. Also how to I request a specific RAL colour? Thank you
	Answer from Rawlins’ Technical Team: Yes this should be fine, however just ensure it isn't something like an oil or wax product that has been used on the floors as this would affect adhesion. You can click 'Select a different colour' on the product page to choose any RAL or BS colour in this product.

Gina on 2018-08-06 18:51:10	Question: Is Blackfriar floor paint tough & durable enough to have in bedroom & withstand moving furniture around like bed etc on it .
	Answer from Rawlins’ Technical Team: Blackfriar Professional Acrylic Floor Paint is suitable for domestic use and could be used in this situation. Provided the floor is wood or concrete and the preparation is followed carefully the acrylic floor paint can be applied. Bare surfaces require a sealer followed by 2 coats of the floor paint as recommended. The coating should be allowed to fully harden before moving furniture about. Allow 7 days for the coating to cure hard. Any sharp objects moved across the floor may damage the coating, felt pads can be used under chair legs, bed frame lags etc and will minimise any damage.

Ronnie on 2017-03-11 21:04:13	Question: Will this paint go yellow after a while
	Answer from Rawlins’ Technical Team: Under normal use no.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Blackfriar Professional Acrylic Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Blackfriar Professional Water Based Floor Sealer

Clear, water-based, low-odour sealer. Ideal for binding, stabilising and sealing friable (loose) and porous surfaces prior to finishing with water-based coatings. Easy and safe to use. Specifically designed to seal bare and porous concrete substrates. Low-odour - ideal for confined or sensitive areas. Use prior to coating with Blackfriar...

£32.20 (incl. VAT)

Shop now

In Stock and Available for Delivery

Floor Application Kit

Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...

£101.80 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

Blackfriar Professional Acrylic Floor Paint

Blackfriar Professional Acrylic Floor Paint

Product customisation

Your customization: Chosen Colour: BS 22 C 31 - White

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Blackfriar Professional Water Based Floor Sealer

Floor Application Kit