Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Astroflame Blue 60 Fire Rated Frame Foam is a specially formulated expanding foam that, when used in conjunction with Blue 60 fire rated packers (available from the drop-down menu above), gives up to 60 minutes fire protection to timber doorsets without the use of additional mastics or sealants.

Blue 60 PU Foam is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to the ozone layer.

It has a fire rating of up to 60 minutes in Timber Doorsets configuration. High quality PU foam recommended for sealing applications where fire resistance is required.

Please note: Astroflame Blue 60 Packers MUST be purchased with each box of Astroflame Blue 60 Fire Rated Frame Foam.
As a guide, the manufacturer states based on a 10mm gap 1 x 750ml can of foam should do 3 doors which would require 33 packers of each size per can. So for a box of 12 x 750ml cans of foam we would expect a requirement of approx. 400 x 1mm (Green), 400 x 3mm (White) and 400 x 5mm (Blue) Packers.

Quick Links - Click To Jump To Section:

• Ordering References
• Features & Benefits
• Technical Properties
• Performance
• Product Availability

Ordering References

Features & Benefits

• According to EN 1634/1 & BS476 PT:22 fire retardant up to 60 mins – see performance tables
• Efficient seal against smoke and gas
• Does not contain CFC’s and H-CFC’s
• Excellent adhesion & filling capacity
• Excellent mounting capacity and stability
• High yield up to 45 litres depending on temperature and humidity
• Excellent adhesion on most substrates (except Teflon, PE and PP)
• High filling capacity
• High thermal & acoustical insulation value
• After cured, it can be painted, cut, trimmed
• No shrinkage
• Mould and water resistant
• Temperature resistance -40°C to +90°C
• Tested in full size single & double doorsets, not linear gaps
• No additional mastics or sealants required
• Acoustically tested to full doorset up to 43dB
• Tested in both metal and timber stud partitionings
• Tested in a retro-fit scenario to allow use for rectification
• Tested with gaps between 7mm & 30mm
• Tested with softwood, MDF & hardwood frame sections
• Installation for Timber Doorsets

Technical Properties

• Base: Polyurethane prepolymer
• Curing System: Moisture
• Skin Formation: Approx. 10 minutes
• Specific gravity: 23+ kg/m³
• Fire properties: BI (DIN 4102)

Performance

30 Minute Timber Doorset

60 Minute Timber Doorset

Product Availability

9 months in unopened packaging in a cool, dry storage place at temperatures between 5°C and 25°C.

Installation

Please see the attachment "Installation Guide" for more information and illustrations.

• During application the temperature of the can and room should be between 5℃ and 30℃
• Frame/wall surface must be free from dust and grease
• Moistening the surfaces before and after the application will ensure faster curing and increase the bonding strength
• Tested with gaps between 7mm and 30mm
• Where fixing points occur pack securely using Blue60 fire rated packers
• Screw on the applicator gun/nozzle and shake can
• Hold the can upside down and activate the foam by pressing the valve
• IMPORTANT - The junction between the door frame and the substrate should be fully filled with Blue60 fire rated foam
• Architraves can then be fitted over un-cured foam or alternatively foam can be allowed to cure and then be removed mechanically

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.