Can I use this on top of latex based leveled floors ?

You would need to refer to the manufacturer of the levelling screed you have used. Usually levelling screeds containing latex are not intended to be left as wearing courses and cannot be painted with anything.

Hi, does this need undercoat if painting rubbed down railings ?

Blackfriar Professional Polyurethane Floor Paint is not for use on railings, assuming you have previously painted, metal railings that need re-painting we would instead recommend Rust-Oleum CombiColor .

Was interested in polyurethane floor paint for outside use given the wide colour range. However I notice it's only in gloss. Are there any alternatives to get a Matt stone colour? Thanks

Rust-Oleum 7200 Floorcoat PU is available in nearly all RAL and BS colours and is available in a Satin Finish.

Hi, Can this product be used on exterior concrete steps? If so, would I need to use a primer first? Many thanks

On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Polyurethane Floor Paint.

Hi, can I use this paint on a concrete floor that has previously been treated with a solvent based sealant? I used Ronseal concrete seal, then discovered I could not paint over with the product I had bought. Really need a paint I can use in this application.

We have no knowledge of the Ronseal product but assuming it can be overpainted with Solvent Based floor paints then Blackfriar Professional Polyurethane Floor Paint should be fine to use.

Blackfriar Professional Polyurethane Floor Paint | Ideal For Most Surfaces

Blackfriar Professional Polyurethane Floor Paint

Reference BF2000012

Brand Blackfriar Professional

Search ID BLA593

Protects and transforms floors with an attractive, hard wearing polyurethane finish in 4,400+ semi-gloss colours.

Interior/exterior use.
Prevents concrete dusting.
Resistant to grease, oil and weak solutions of acid and alkali.
Apply to previously painted surfaces.
Brush or roller application.

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£69.67(incl. VAT)

£58.06(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

6 questions about the product

Description

Blackfriar Professional Polyurethane Floor Paint protects and transforms floors with an attractive, tough and hardwearing finish. Resists oil, grease and chemicals, making it ideal for indoor and outdoor industrial and domestic surfaces.

Recommended Uses

Wood
Concrete
Cement
Metal
Brickwork

Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Polyurethane Floor Paint.

Application

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Floor Sealer followed by 1-2 coats of Blackfriar Professional Polyurethane Floor Paint. On previously painted surfaces apply 1-2 coats as required.

Blackfriar Professional Polyurethane Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, asphalt floors or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions.

If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed by Blackfriar Professional Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Polyurethane Floor Paint.

Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres.

Drying Time

4-6hrs @20°C. Allow to dry for a minimum of 16hrs @20°C between coats. Allow to dry for a minimum of 48hrs @20°C before subjecting to heavy traffic. Full cure is achieved in 5- 7 days @20°C.

Clean Up

Remove as much product from application equipment as possible before washing with a suitable brush cleaner or White Spirits. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details

Reference 593-947311

Data sheet

Manufacturer: Blackfriar Professional
For Use By: Professional Use
Interior / Exterior Use: Interior & Exterior
For Use On: Wood, Concrete, Cement, Brickwork
Application Method: Brush, Roller
Sheen: Gloss
Colour: Fully Tintable
Single, Two or Three Pack: Single
Pack Size: 1L, 2.5L, 5L
Parts: One
Base Type: Solvent Based
Interior/Exterior Use: Both
Suitable Substrates: Wood, Concrete, Cement, Metal, Brickwork
Application: Brush, Roller
Dry to Recoat (at 20°C): 16 Hours
Coverage: 12-14m² per litre
VOC: 375g/litre
Finish: Gloss
UN Number: UN1263
UN Number: UN1263
Base Type: Solvent-Based
Suitable For Use On: Brick
Suitable For Use On: Wood
Suitable For Use On: Cement
Suitable For Use On: Metal
Suitable For Use On: Concrete
Finish: Gloss
Application Method: Brush
Application Method: Roller
Components: 1K
Product Usage Type: Topcoat
Fastest Delivery: Next Working Day
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: White
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Product Type: Polyurethane
Product Attributes: Tintable

Attachments

Download

Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Victoria on 2019-06-21 12:24:54	Question: Can I use this on top of latex based leveled floors ?
	Answer from Rawlins’ Technical Team: You would need to refer to the manufacturer of the levelling screed you have used. Usually levelling screeds containing latex are not intended to be left as wearing courses and cannot be painted with anything.

stewart on 2018-07-25 09:08:08	Question: Hi, does this need undercoat if painting rubbed down railings ?
	Answer from Rawlins’ Technical Team: Blackfriar Professional Polyurethane Floor Paint is not for use on railings, assuming you have previously painted, metal railings that need re-painting we would instead recommend Rust-Oleum CombiColor.

Lisa Courtney on 2018-04-14 10:47:47	Question: Can this be used on stair treads? Thank you
	Answer from Rawlins’ Technical Team: Assuming the surfaces to be painted are suitably prepared wood, concrete or metal then yes. However, surfaces are slippery when wet, to ensure slip resistance the floor must be kept dry when in use. Alternatively to ensure better slip resistance you could use Blackfriar Professional Anti-Slip Floor Paint.

Reg on 2017-11-07 12:13:00	Question: Was interested in polyurethane floor paint for outside use given the wide colour range. However I notice it's only in gloss. Are there any alternatives to get a Matt stone colour? Thanks
	Answer from Rawlins’ Technical Team: Rust-Oleum 7200 Floorcoat PU is available in nearly all RAL and BS colours and is available in a Satin Finish.

Lesley on 2017-10-05 09:47:43	Question: Hi, Can this product be used on exterior concrete steps? If so, would I need to use a primer first? Many thanks
	Answer from Rawlins’ Technical Team: On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Polyurethane Floor Paint.

Daniel on 2017-08-12 15:58:09	Question: Hi, can I use this paint on a concrete floor that has previously been treated with a solvent based sealant? I used Ronseal concrete seal, then discovered I could not paint over with the product I had bought. Really need a paint I can use in this application.
	Answer from Rawlins’ Technical Team: We have no knowledge of the Ronseal product but assuming it can be overpainted with Solvent Based floor paints then Blackfriar Professional Polyurethane Floor Paint should be fine to use.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Blackfriar Professional Polyurethane Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Floor Application Kit

Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...

£101.80 (incl. VAT)

Shop now

In Stock and Available for Delivery

Blackfriar Professional Floor Sealer

Clear, solvent-based, alkyd sealer. Ideal for binding, stabilising and sealing friable (loose) and porous surfaces prior to finishing with solvent based coatings. Specifically designed to seal bare and porous concrete substrates. Use prior to coating with Blackfriar Professional Polyurethane Floor, Anti-Slip, and Anti-Climb Paints. Also...

£43.67 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Blackfriar Professional Polyurethane Floor Paint

Blackfriar Professional Polyurethane Floor Paint

Product customisation

Recommended Uses

Preparation

Application

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Floor Application Kit

Blackfriar Professional Floor Sealer