- Reduced price
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
CLEARANCE - Rust-Oleum 7200 Floorcoat PU - RAL 6037 Pure Green - Gloss - 5L
7268.2.5 - CLEARANCE
RUS8512
Rust-Oleum 7200 Floorcoat PU is a single pack, polyurethane enhanced floor coating for use inside and out that offers good protection and is very easy to apply. Also Available in 4,100+ colours, in Gloss and Satin finishes, including RAL, BS or NCS shades (except metallic and fluorescent shades), and can be applied directly on concrete floors, wooden floors and masonry.
- Extra durable because of polyurethane addition
- Excellent flow and aspect
- High coverage: 9m² per litre
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Description
Rust-Oleum 7200 Floorcoat PU is a single pack easy to apply solvent based urethane modified alkyd floor coating specially designed for applying on dry concrete, wood and masonry for interior and exterior use. Rust-Oleum 7200 Floorcoat PU is also ideal as a line marking product, the coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.
Rust-Oleum 7200 Floorcoat PU can be applied directly on concrete floors, wooden floors and masonry which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion. Rust-Oleum 7200 Floorcoat PU can also be applied on old good adhering coatings and can also be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Product Advantages:
- Extra durable because of polyurethane addition
- Excellent flow and aspect
- Any colour available in gloss & satin
- For indoor and outdoor usage
- For many different surfaces
- High coverage: 9m² per litre
Can Be Used For:
- Concrete floors
- Line marking
- Wooden floors
- Pre-painted floors
Preparation:
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Remove oil, grease and other contamination with Rust-Oleum Mathys ND14 Cleaner Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean. On porous concrete a first coat should be applied with Rust-Oleum 7200 Floorcoat PU diluted with ±5% Rust-Oleum Thinner 633. On new concrete (>28 days) use Rust-Oleum 7201 Universal Floor Primer as a first coat or use Rust-Oleum Mathys 108 Surfa Etch Solution to neutralise any remaining alkalinity from the cement. Remove curing compounds by means of dust free blasting.
Application & Thinning:
- Brush: Sparingly, if required, with 5% Rust-Oleum Thinner 633.
- Roller: Sparingly, if required, with 5% Rust-Oleum Thinner 633. In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
- Air-Atomised Spray: Thin with max. 10% Rust-Oleum Thinner 641. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 – 4 bar.
- Cleanup: Immediately after application using Rust-Oleum Thinner 633.
Application Conditions:
Apply in a dry and well-ventilated area. Do not apply Rust-Oleum 7200 Floorcoat PU on alkaline substrates, or in areas which will be constantly under water.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
8512-1038178
Data sheet
- For Use On
- Concrete, Wood, Masonry
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 8 Hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 1 week
- Coverage
- 9m² per litre
- Recommended Thinner/Cleaner
- Thinner 633
- Density
- 1,1
- Solids by Volume
- 45 %
- VOC
- 450 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 4 Hours
- Recommended Dry Film Thickness
- 50 µm
- Recommended Wet Film Thickness
- 110 µm
- UN Number
- Not regulated
- Brand
- Rust-Oleum
- Colour Family
- Green
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - Rust-Oleum 7200 Floorcoat PU - RAL 6037 Pure Green - Gloss - 5L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Rust-Oleum Thinner 641
High performance thinner, for use on metal primers and floor coatings. High diluting capacity based on aromatic hydrocarbons. Specifically designed for spray applications. Consult the respective product data sheet for further details. Professional use only.
Price
£77.78
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Mathys 108 Surfa Etch Solution
High performance etching solution. For use on smooth concrete, masonry, galvanised steel, and aluminium. Improves adhesion of coatings. Neutralises alkaline salts. Removes 'white rust' from metal. Non-flammable. Professional use only.
Price
£70.16
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Mathys ND14 Cleaner Degreaser
Non-flammable, virtually odour-free cleaning/degreasing solution used to remove grease, oil, proteins, dirt and more from coated, mineral and steel substrates. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge, cloth, brush or broom Low concentration (3-5% is sufficient for most cleaning)
Price
£93.95
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Thinner 633
Highly diluting solvent for alkyd-based coatings. Ideal for cleaning and thinning alkyd resin-based products. For metal, wood, and floors. High VOC level of 755 g/l. Compatible with several Rust-Oleum primers and floor coatings. Professional use only.
Price
£16.26
(incl. VAT)
In Stock and Available for Delivery
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...
Price
£101.80
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum 7201 Universal Floor Primer
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion...
In stock
Rust-Oleum Non-Skid Additive NS 100
Available in white. Anti-slip additive for 1K paints. Ideal for use on floors in bathrooms and other indoor spaces. Can be pre-mixed or broadcasted over wet paint for a subtle non-slip finish. Comes with a 5-year shelf life guarantee. Professional use only.
Price
£8.30
(incl. VAT)
In Stock and Available for Delivery