Follow us on:

Watco Fine Crack Filler
Watco Fine Crack Filler
Watco Fine Crack Filler
Watco Fine Crack Filler
Watco Fine Crack Filler
Watco Fine Crack Filler

Watco Fine Crack Filler

FCF
WAT9291

Watco Fine Crack Filler is a simple to use, incredibly tough product for filling unsightly cracks in concrete floors prior to coating. Its liquid formulation ensures that no sanding down will be needed to make it level once cured.

  • Can be coated with any Watco high performance floor coating
  • Fast curing – non shrink
  • Super tough, epoxy resin formula
  • Ideal for cracks up to 3mm wide

Available in original and cold cure version that can be applied at temperatures as low as 0°C.

Item
Size
£44.88(incl. VAT)
£37.40(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Quick Links - Click To Jump To Section:




Features & Benefits


  • Areas of Use:
    • Narrow cracks in concrete floors
    • Small holes less than 50mm diameter and 25mm deep
    • Ideal for cracks up to 3mm wide
  • Can be coated with any Watco high performance floor coating
  • Fast curing – non shrink
  • Super tough, epoxy resin formula



Surface Prepration


Clean and rake out cracks ensuring that they are dry and free from dust etc. It is not normally necessary to ‘chase out’ cracks.



Mixing


Each Watco Fine Crack Filler/Fine Crack Filler Cold Cure pack contains a tin of curing agent and a separate tin of resin. Add the contents of the curing agent tin to the tin of resin and stir thoroughly with a flat mixing blade. Scrape down the sides and bottom of the tin during mixing to avoid unblended resin/curing agent creating ‘soft spots’ in the cured product.



Application


Pour carefully out of the tin onto and along the line of the crack and level off by using a straight edge or plastic/rubber scraper. Wipe away any excess. Leave to harden for 4 hours at 20°C for Watco Fine Crack Filler or 4 hours at 0°C-5°C for Watco Fine Crack Filler Cold Cure.

The repair may be coated with any type of floor paint or high performance coating eg: Watco Epoxy Gloss Coat.



Limitations


Cracks in floors where one side has subsided can also be filled, but it will be impossible under these circumstances to achieve a flush finish. Watco Concrex may be used to make up differences in floor levels.

Watco Fine Crack Filler and Watco Fine Crack Filler Cold Cure will not remedy structural or bonding problems and are intended for surface filling only.

Cracks caused by structural movement may reappear if movement persists.



Product Details
9291-947032

Data sheet

Manufacturer
Watco
For Use By
Consumer Use
For Use On
Concrete
Application Method
Straight edge or plastic/rubber scraper
Single, Two or Three Pack
Two-Pack
Pack Size
0.5L
Fully Cured (at 20°C)
Fine Crack Filler: Normally 3 - 4 hours. Curing time will be extended by low temperatures.
Coverage
500ml will fill over 25 linear metres of a crack 2mm wide and 5mm deep (please note that nearly all cracks will vary in dimension along their length so coverage figures cannot be precise).
Shelf Life (from date of manufacture)
12 months in unopened containers.
Pot Life
20 - 30 minutes
Fully Cured
Fine Crack Filler Cold Cure: Normally 4 hours at 0°C - 5°C.
Base Type
100% Solids
Suitable For Use On
Concrete
Suitable For Use On
Concrete Floors
Application Method
Spreader
Product Usage Type
Repair
Categorised As
Repairs > Low Temperature Crack Fillers
Seasonal
Cold Weather
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Watco Fine Crack Filler is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT